Comments for Rotary Hillclimb Racing http://rotaryhillclimbracing.com Rotary Hillclimb Racing updates in Queensland at Mt Cotton, Noosa and other hillclimb racing locations - Watch as we build our own rotary hillclimb racing car Wed, 05 Oct 2011 09:21:14 -0600 http://wordpress.org/?v=2.8.4 hourly 1 Comment on 2011 Historic Leyburn Sprints Report. by kirstie.... http://rotaryhillclimbracing.com/hillclimb-results/2011-historic-leyburn-sprints-report/comment-page-1/#comment-5606 kirstie.... Wed, 05 Oct 2011 09:21:14 +0000 http://rotaryhillclimbracing.com/?p=828#comment-5606 ke70s are way faster man, your pretty lucky none of those run in your hillclimb's :) ke70s are way faster man, your pretty lucky none of those run in your hillclimb’s :)

]]> Comment on Hillclimb Results Round 3 – Mt Cotton 2011. by admin http://rotaryhillclimbracing.com/hillclimb-results/hillclimb-results-round-3-mt-cotton-2011/comment-page-1/#comment-5374 admin Mon, 19 Sep 2011 03:49:37 +0000 http://rotaryhillclimbracing.com/?p=805#comment-5374 Hi Shane, Sorry but I do not have and engines or parts. Have you tried to get a motor built by Ben Hunt at Rotary Motorsport (07) 3205 1133 Ben has built our current engine and it is running very well with good power, I would highly recommend Ben for any motor parts building or engine tuning. Ben could possibly get you a 2nd hand engine if you required, just give him a call. Regards Warwick. Hi Shane,

Sorry but I do not have and engines or parts.
Have you tried to get a motor built by Ben Hunt at Rotary Motorsport (07) 3205 1133
Ben has built our current engine and it is running very well with good power, I would highly recommend Ben for any motor parts building or engine tuning.
Ben could possibly get you a 2nd hand engine if you required, just give him a call.

Regards Warwick.

]]> Comment on Hillclimb Results Round 3 – Mt Cotton 2011. by Shane anderson http://rotaryhillclimbracing.com/hillclimb-results/hillclimb-results-round-3-mt-cotton-2011/comment-page-1/#comment-5332 Shane anderson Fri, 16 Sep 2011 10:10:31 +0000 http://rotaryhillclimbracing.com/?p=805#comment-5332 Please can you you help. We are looking for a s5 13bt engine in good nic. Ours has done a seal and boils all the time. Can't find anyone out there who can help us. Please return comments or call me at home 0732006351. Thanks guys. Luv the sport. Please can you you help. We are looking for a s5 13bt engine in good nic. Ours has done a seal and boils all the time. Can’t find anyone out there who can help us. Please return comments or call me at home 0732006351. Thanks guys. Luv the sport.

]]> Comment on Getting ready for 2011 Qld. Hillclimb season by admin http://rotaryhillclimbracing.com/building-rotary-hillclimb-racing-car/getting-ready-for-2011-qld-hillclimb-season/comment-page-1/#comment-3749 admin Mon, 27 Jun 2011 09:35:25 +0000 http://rotaryhillclimbracing.com/?p=708#comment-3749 Hi Cameron, Thanks yes we are very happy with that time, it is hard to believe that even with that great time we ended the weekend 5th outright, It was a great weekend and very completive. Let’s hope we can get better times for next year. Regards Warwick Hi Cameron,
Thanks yes we are very happy with that time, it is hard to believe that even with that great time we ended the weekend 5th outright, It was a great weekend and very completive. Let’s hope we can get better times for next year.

Regards Warwick

]]> Comment on Getting ready for 2011 Qld. Hillclimb season by Cameron http://rotaryhillclimbracing.com/building-rotary-hillclimb-racing-car/getting-ready-for-2011-qld-hillclimb-season/comment-page-1/#comment-3684 Cameron Tue, 21 Jun 2011 11:21:28 +0000 http://rotaryhillclimbracing.com/?p=708#comment-3684 Hey Warwick....Well done. 38.71 second lap, QHC 2011 - Absolutely outstanding! Hey Warwick….Well done. 38.71 second lap, QHC 2011 – Absolutely outstanding!

]]> Comment on Hillclimb Results Round 1 – Mt Cotton 2011 by admin http://rotaryhillclimbracing.com/hillclimb-results/hillclimb-results-round-1-mt-cotton-2011/comment-page-1/#comment-3629 admin Sat, 18 Jun 2011 00:55:46 +0000 http://rotaryhillclimbracing.com/?p=729#comment-3629 Hi Brian, Yes the car is going very well, we just had the Queensland Hillclimb Championships a few weeks ago and we did 3 Personal best times the best being 38.71seconds, still a bit to go to get the record for class, but still more in the set-up & the driver. All of the 9 runs for the weekend bar the first run off the trailer were under the 40s. You are correct the brake pads are still the same set that we purchased from you the 01 compound. They seem to be getting better the more I use them or I am slowly getting better I don’t know, but seriously they have given me the braking performance and confidence that I needed to make our car an outright contender. They have worn but only slightly, we have been busy with events this year, and the 2nd & 3rd of July we are back at the Noosa Hillclimb, Trying to see if we can get the track record back this year. We are also trying to enter a few street sprints to give the car more opportunity to stretch its legs, as we have upgraded the engine output to 430HP Rear wheel and more torque. Good to see that you are keeping an eye on our progress. I hope that you are well and please keep in contact. Regards Warwick. Hi Brian,

Yes the car is going very well, we just had the Queensland Hillclimb Championships a few weeks ago and we did 3 Personal best times the best being 38.71seconds, still a bit to go to get the record for class, but still more in the set-up & the driver. All of the 9 runs for the weekend bar the first run off the trailer were under the 40s.

You are correct the brake pads are still the same set that we purchased from you the 01 compound. They seem to be getting better the more I use them or I am slowly getting better I don’t know, but seriously they have given me the braking performance and confidence that I needed to make our car an outright contender.

They have worn but only slightly, we have been busy with events this year, and the 2nd & 3rd of July we are back at the Noosa Hillclimb, Trying to see if we can get the track record back this year. We are also trying to enter a few street sprints to give the car more opportunity to stretch its legs, as we have upgraded the engine output to 430HP Rear wheel and more torque.

Good to see that you are keeping an eye on our progress.
I hope that you are well and please keep in contact.

Regards Warwick.

]]> Comment on Hillclimb Results Round 1 – Mt Cotton 2011 by BRIAN GORE http://rotaryhillclimbracing.com/hillclimb-results/hillclimb-results-round-1-mt-cotton-2011/comment-page-1/#comment-3322 BRIAN GORE Sat, 28 May 2011 04:47:12 +0000 http://rotaryhillclimbracing.com/?p=729#comment-3322 glad yo see youre still doing well in the car dipping under the 40's bet youre still on first set of bake pads ! back at Performance Friction Europe office and still recommending 01 to hillclimb competitors, weathers just not as good here... best regards Brian glad yo see youre still doing well in the car dipping under the 40’s

bet youre still on first set of bake pads !

back at Performance Friction Europe office and still recommending 01 to hillclimb competitors, weathers just not as good here…

best regards

Brian

]]> Comment on Fitting the wings to the rotary hillclimb racing car and Dyno Tuning Engine by admin http://rotaryhillclimbracing.com/building-rotary-hillclimb-racing-car/wings/fitting-the-wings-to-the-rotary-hillclimb-racing-car-and-dyno-tuning-engine/comment-page-1/#comment-2775 admin Mon, 11 Apr 2011 03:44:09 +0000 http://rotaryhillclimbracing.com/?p=221#comment-2775 Hi Bill, Good to see that you are keeping me on my toes. We are also trying to fit new wing to the front to get more front grip, hopefully we will be able to keep Rod honest. Are you still in northern NSW or are you back to Qld.? It would be good to catch up with you at the QHC in june. I hope you and your family are all well. Kind regards Warwick. Hi Bill,
Good to see that you are keeping me on my toes.
We are also trying to fit new wing to the front to get more front grip, hopefully we will be able to keep Rod honest.
Are you still in northern NSW or are you back to Qld.?
It would be good to catch up with you at the QHC in june.
I hope you and your family are all well.
Kind regards
Warwick.

]]> Comment on Fitting the wings to the rotary hillclimb racing car and Dyno Tuning Engine by Bill Norris http://rotaryhillclimbracing.com/building-rotary-hillclimb-racing-car/wings/fitting-the-wings-to-the-rotary-hillclimb-racing-car-and-dyno-tuning-engine/comment-page-1/#comment-2769 Bill Norris Fri, 08 Apr 2011 22:06:06 +0000 http://rotaryhillclimbracing.com/?p=221#comment-2769 Hi Warwick Good to see your car running in the 39s and that the R&D is showing results as you know Rod Johns is running the Norris Hawk in the up to 1300 cc class at the moment and as a favour to you Iv decieded to build him an improved set of wings and a new defuser to help him stay compettive with you thus providing you with more fun and enjoyment no no thats OK you dont have to thank me alls fair in hill climbing Good luck with the new motor and the 2011 season Regards Bill Norris Hi Warwick
Good to see your car running in the 39s and that the R&D is showing results
as you know Rod Johns is running the Norris Hawk in the up to 1300 cc class at the moment
and as a favour to you Iv decieded to build him an improved set of wings and a new defuser
to help him stay compettive with you thus providing you with more fun and enjoyment
no no thats OK you dont have to thank me alls fair in hill climbing
Good luck with the new motor and the 2011 season
Regards Bill Norris

]]> Comment on Getting ready for 2011 Qld. Hillclimb season by Phill http://rotaryhillclimbracing.com/building-rotary-hillclimb-racing-car/getting-ready-for-2011-qld-hillclimb-season/comment-page-1/#comment-2662 Phill Thu, 17 Feb 2011 12:35:55 +0000 http://rotaryhillclimbracing.com/?p=708#comment-2662 Looking Good Guys..... Should be a great weekend... All the best for great times !!! Looking Good Guys….. Should be a great weekend… All the best for great times !!!

]]>