Archive for August, 2008

The suspension control arms are made to fit rotary hillclimb racing car

Now that the suspension up-rights have been machined and are finished, I now needed to link the uprights to the chassis and be able to connect the suspension components to the car. As the front suspension is relatively fixed, thanks to Van-dieman, the front was the first suspension control arms that I made. The photos show the front RHS upright with the upper and lower control arms attached note that the upper camber adjuster is just tacked together to check to see if there is any issues with clearance etc.

Front RHS Upright with Control Arms tacked together

Front RHS Upright with Control Arms tacked together

Jig for Control Arms

Jig for Control Arms

(more…)

Posted by on August 4th, 2008 No Comments